Kieninger Clock Movement Sets for Clock Makers who insist on the Best!
Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.
On the Sets 'Options & Prices' page you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions. Oakside will remove the moon arches from all 250mm & 280mm moon dials to provide 250 & 280mm square versions.
On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!
Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Kieninger movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!
CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.
If this is your first Grandfather clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration, especially the clock by Pieter van Vliet of Canada - visit his web site and you will find a complete set of plans and fully illustrated guide to building a clock in the style of our Hampshire & Winchester with photos of each stage of construction.
BECAUSE EACH SET HAS TO BE ASSEMBLED FROM INDIVIDUAL COMPONENTS, ORDERS ARE TAKING UP TO THREE WEEKS TO PROCESS
Grandfather Clock 2080mm tall, 610mm wide and 305mm deep. (Kieninger movement installation drawing included).
Constructing this clock case will require a reasonable degree of practical skills but not beyond any one who is prepared to study the drawings and instructions.
Please take adequate time in planning the stages of cutting blanks of timber and fabricating the templates that will be used in conjunction with a router to shape the moulding etc.
The end result will provide great satisfaction and enhance your home.
Frank will provide ongoing advice especially when you ready to install the movement etc.
A comprehensive set three very large plans with drawings of full size templates; and diagrams showing cutting and machining guidance.
Sixteen A4 pages of assembly drawings and ten pages of printed instruction.
All of the Movement, Dial and Pendulum Sets listed on this web page can be installed in a clock cabinet built to the selected plan, however you must compare the dimensions stated on the Kieninger movement instalation drawing we provide and decide if you need to make changes to any of the plans cabinet dimensions prior to constructing the cabinet.
Clockmakers Set 49 featuring the Kieninger SK004, 116cm movement
Plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.
THIS MOVEMENT SET IS IDEAL FOR YOUR FIRST GRANDFATHER CLOCK. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: SK 116cm
Dial: Kieninger 250 x 330mm Dial
Pendulum: Kieninger 116cm x 140mm Timber Pendulum.
Pendulum parts: Pendulum leader 164mm. (For 80cm to 116cm movements)
Weight Shells: Three 40mm x 245mm polished brass shells.
Shell Fillings: Iron; Strike 2.0kg. Time 2.8kg. Chime 3.0kg.
Gongs: 8-rod gong assembly - Included.
Mounting: Movement fixing screws
Movement dimensions: SK
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The SK 116cm Pendulum Movement specifications. Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.
This movement set requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
The Timber pendulum (086) with a 165mm bob swings 210mm
The Lyre pendulum (095) with a 165mm bob swings 245mm
The Lyre pendulum (096) with a 220mm bob swings 270mm. The distance from the handshaft nut to the centre of the bob is 1040mm.
The weights need to be able to drop a minimum distance of 1328mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 140mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£690.00 (EUR 862.50)
Please note that we ship to Canada, USA, Australia & New Zealand.
Plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.
THIS MOVEMENT SET IS IDEAL FOR A GRANDFATHER CLOCK. (Movement out of stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger RK 047 - 116cm
Dial: Oakside 250mm x 330mm Tempus Fugit dial. No back plate so need to be fixed to your case
Pendulum: Kieninger 116cm x 140mm Timber Pendulum.
Pendulum parts: Pendulum leader 164mm. (For 80cm to 116cm movements)
Weight Shells: Polished brass weight shell complete, 50 x 160mm.
Shell Fillings: Filling, lead Ø48mm x 160mm. 3.1kg
Gongs: 8-rod gong assembly - included.
Mounting: Movement fixing screws
Movement dimensions: RK Drawing
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The RK 047 movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 bronze bushes.
The movement plays the Westminster melody on the quarters on four rods of the gong.
The movement strikes the hours on four rods of the gong.
Patented Kienirramic solid anchor Dead Beat Graham escapement
Automatic tick (beat adjustment).
Two levers allow selection of Continuose, Automatic Night Silencing or Silent for the Strike and Chime.
Handshaft protrusion (movement front plate to tip, 35.8mm.
The movement requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
For 8-day running the weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet.
When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm. The distance from the rear panel to the front face of the weight is approximately 140mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£0.00 (EUR 0.00)
Please note that we ship to Canada, USA, Australia & New Zealand.
Automatic sequencing of the Westminster, Whittington & St. Michael melodies that play on the quarters and chime the hours on a twelve-rod gong.
THIS MOVEMENT SET IS IDEAL FOR A GRANDFATHER CLOCK. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger KSU 50 - 116cm
Dial: Oakside 250 x 350mm Traditional White Moon face dial with black Roman numerals and decorations.
Pendulum: Kieninger 116cm x 140mm Timber Pendulum.
Pendulum parts: Pendulum leader 164mm. (For 80cm to 116cm movements)
Pulleys: Three brass pulleys included.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike 3.0kg, Time 4.0kg (5.0kg for heavy pendulums), Chime 4.0kg.
Gongs: KSU 12-rod gong 680mm .
Mounting: Movement fixing screws
Movement dimensions: KSU50 & 52
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The KSU 50, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or any of the three melodies - The Hourly chimes and the melodies are played on a 12-rod gong.
This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel. The weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the bottom of the cabinet. The timber pendulum with the 140mm Bob has a swing width of 210mm. The distance from the rear panel to the front face of the weight is approximately 185mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£1,246.38 (EUR 1,557.98)
Please note that we ship to Canada, USA, Australia & New Zealand.
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: HSG 116cm
Dial: Printed on plastic sheet version of the Mora 355mm ready for attaching to your dial back board
Pendulum: Kieninger 116cm x 140mm Timber Pendulum.
Pendulum parts: Pendulum leader 164mm. (For 80cm to 116cm movements)
Pulleys: Not required
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike; 4.0kg. Time; 4.0kg
Gongs: 100mm diameter cast brass bell.
Movement dimensions:
Chain movement with 1/2 hour strike on rear mounted single bell 100 mm, run time 7 days, plate size 150 x 150 x 2,5 mm, 4 Aeterna bronce bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off, integrated dial lock lever.
Price including UK delivery and VAT£699.00 (EUR 873.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
THIS MOVEMENT SET IS IDEAL IF YOU ARE BUILDING A TRADITIONAL GRANDFATHER CLOCK . (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: HE 011 - 116cm
Dial: The Oakside Mora dial in white with black Roman numerals is the correct diameter for the Mora clock plan.
Pendulum: Kieninger 116cm x 140mm Timber Pendulum.
Pendulum parts: Pendulum leader 164mm. (For 80cm to 116cm movements)
Pulleys: Not required with this movement.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike; 4.0kg.Time; 4.0kg
Gongs: 8-rod gong - 680mm. SK MS SK KS
Mounting: Two fixing screws
Movement dimensions: HE 8-rod gong
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The HE 011, 116cm Pendulum Chain Movement specifications; Half hour Bim Bam striking on an eight-rod gong
Specifications;
Movement plate size 150 x 150 x 2,5 mm, 4 bronze bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off,
This movement set requires a minimum measurement of 178mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 255mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 170mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£699.00 (EUR 873.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
