Kieninger Clock Movement Sets for Clock Makers who insist on the Best!
Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.
On the Sets 'Options & Prices' page you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions. Oakside will remove the moon arches from all 250mm & 280mm moon dials to provide 250 & 280mm square versions.
On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!
Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Kieninger movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!
CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.
If this is your first Grandfather clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration, especially the clock by Pieter van Vliet of Canada - visit his web site and you will find a complete set of plans and fully illustrated guide to building a clock in the style of our Hampshire & Winchester with photos of each stage of construction.
BECAUSE EACH SET HAS TO BE ASSEMBLED FROM INDIVIDUAL COMPONENTS, ORDERS ARE TAKING UP TO THREE WEEKS TO PROCESS
All of the Movement, Dial and Pendulum Sets listed on this web page can be installed in a clock cabinet built to the selected plan, however you must compare the dimensions stated on the Kieninger movement instalation drawing we provide and decide if you need to make changes to any of the plans cabinet dimensions prior to constructing the cabinet.
Clockmakers Set 11 featuring the Kieninger APL 35cm movement
Pendulum nominal length 35cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: APL 01 - 35cm
Dial: Oakside 155mm round Roman dial.
Pendulum: Kieninger 35cm Pendulum with 80mm bob
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Gongs: APL 5-rod gong, 180mm rear panel mounting.
Mounting: Four pillars connect to the rear panel of the clock - included.
Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The APL movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum (106) and 80mm bob the distance from the hand-shaft to the centre of the bob is 315mm and the total swing is 145mm.
When using the Metal Grid pendulum with the 80mm bob the distance from the hand-shaft to the centre of the bob is 330mm.
The APL is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£499.00 (EUR 623.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 13 featuring the Kieninger APL 43cm movement
Pendulum nominal length 43cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: APL 05 - 43cm
Dial: Oakside 155mm round Roman dial.
Pendulum: Kieninger 43cm Pendulum with 80mm bob
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Gongs: APL 5-rod gong, 180mm rear panel mounting.
Mounting: Rear mounting Pillars (4) APL
Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The APL 05 movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum (106) and 80mm bob the distance from the hand-shaft to the centre of the bob is 315mm and the total swing is 145mm.
When using the Metal Grid pendulum with the 80mm bob the distance from the hand-shaft to the centre of the bob is 330mm.
The APL 05 is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£499.18 (EUR 623.98)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 15 featuring the Kieninger APL 48cm movement
Pendulum nominal length 48cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: APL 48cm (no seconds
Dial: Oakside 155mm round Roman dial.
Pendulum: Kieninger 48cm Pendulum with 80mm bob
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Gongs: APL 5-rod gong, 180mm rear panel mounting.
Mounting: Four brass rear mounting pillars included
Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The APL 48cm movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum and 80mm bob the distance from the hand-shaft to the centre of the bob is 315mm and the total swing is 145mm.
When using the Metal Grid pendulum with the 80mm bob the distance from the hand-shaft to the centre of the bob is 330mm.
The APL 48cm is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£499.00 (EUR 623.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 16PO featuring the Kieninger JM 09 54cm movement (Kieninger supplied old stock)
Pendulum nominal length 54cm. Spring drives. 7 day running.
Plays the Westminster chimes on an five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: JP 54cm Previously owned movement. Inspected and Serviced by Oakside
Dial: Kieninger Ø155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum:
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Gongs: J series 8-rod gong - 140mm - rear mounting
Movement dimensions: JP
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
This movement and dial asembly has been previously owned and has now been servised and tested by Frank.
The JM09 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, pendulum time regulation.
THe chime control lever has three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent.
This movement winds through the dial.
This movement is suitable for small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel.
Distance from the centre of the dial to the centre of the pendulum bob is approximately 440mm.
Total swing of the 80mm diameter bob is 150mm.
When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£675.00 (EUR 843.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 17 featuring the Kieninger APL 54cm movement
Pendulum nominal length 54cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: APL 07 - 54cm
Dial: Oakside 155mm round Roman dial.
Pendulum: Kieninger 54cm x 140mm Timber Pendulum.
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Gongs: APL 5-rod gong, 180mm rear panel mounting.
Mounting: Rear mounting Pillars (4) APL
Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The APL 07 movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum (107) and 80mm bob, the distance from the hand-shaft to the centre of the bob is 395mm and the total swing is 145mm.
When using the Metal Grid pendulum with the 115mm bob, the distance from the hand-shaft to the centre of the bob is 450mm. The distance from the hand shaft down to the lowest tip of the pendulum is 525mm.
The APL 07 is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£499.12 (EUR 623.90)
Please note that we ship to Canada, USA, Australia & New Zealand.
THIS MOVEMENT SET IS IDEAL FOR MEDIUM WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: LSR 02 - 65cm
Dial: Oakside 155mm round Roman dial.
Pendulum: Kieninger 65cm x 115mm Timber Pendulum
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Pulleys: Small brass cable pulley (35mm) for PS & RS movements.
Weight Shells: Shell 50 x 195mm with end caps (small hook).
Shell Fillings: .
Gongs:
Mounting: Movement fixing pillars and screws
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The LSR 02 movement specifications. Plate size 100mm x 85mm x 1.7mm with 4 bronze bushes. the patented Kienirramic& solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, Chime silencing and front Winding through the Dial. The movement chimes the hours and strikes a single chime on the half hour on coil gong.
This movement set requires a minimum measurement of 108mm from the front of the hand-shaft to the inside of the rear panel, the pendulum with a 140mm diameter bob swings approximately 190mm. To achieve eight-day running the weights drop 730mm measured from the hand-shaft to the bottom of the case. The distance from the hand-shaft to the bottom of the cabinet needs to be a minimum of 420mm to achieve eight-day running. The distance from the rear panel to the front face of the weights is approximately 135mm.
The Dial, Hands and Movement are supplied assembled and ready for mounting on your support board - you need to drill three holes in the rear board using the template provided and the chimes can be easily mounted using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£448.95 (EUR 561.19)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 18B featuring the Kieninger LPR01, 65cm movement
Pendulum nominal length 65cm. Spring drives. 7 day running.
Hour strike on single bell with shut off lever.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: LPR 01 65cm spring drive with hour strike on a single rear mounted bell
Dial: Oakside Ø155 round white dial
Pendulum: Kieninger 65cm x 115mm Timber Pendulum
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Gongs:
Mounting: Movement fixing pillars and screws
Movement dimensions: LPR01
Key wind movement with 1/2-hour strike on rear mounted bell 50 mm, run time 7 days, plate size 100 x 85 x 1,7 mm, 4 Aeterna bronze bushings (2nd wheel) and anti snap-back winding system, Kieniramic7 solid anchor with dead beat escapement (Graham) and automatic beat adjustment, strike shut-off
Price including UK delivery and VAT£375.00 (EUR 468.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
THIS MOVEMENT SET IS IDEAL FOR MEDIUM WALL CLOCKS. (Movement on order)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger PS 055 - 65cm. Automatic night silencing.
Dial: Oakside Ø180mm white dial with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Kieninger 65cm x 140mm Timber Pendulum. (black lacquered shaft).
Pulleys: Small brass cable pulley (35mm) for PS & RS movements.
Weight Shells: Two - 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm with small hooks
Gongs: 133mm Coil gong Kieninger PS
Mounting: Cable suspension plate included in set.
Movement dimensions: PS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 114mm x 99mm x 2.0mm. A dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 055 movement chimes the hours and strikes on the half-hour on a coiled gong.
The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£995.80 (EUR 1,244.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 21 featuring the Kieninger APL 65cm movement
Pendulum nominal length 65cm. Spring drives. 7 day running. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: APL 65cm (no seconds
Dial: Oakside Ø155 round white dial
Pendulum: Kieninger 65cm x 140mm Timber Pendulum. (black lacquered shaft).
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Gongs: APL 5-rod gong, 180mm rear panel mounting.
Mounting: Rear mounting Pillars (4) APL
Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The APL 65cm movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum (107) and 80mm bob, the distance from the hand-shaft to the centre of the bob is 395mm and the total swing is 145mm.
When using the Metal Grid pendulum with the 115mm bob, the distance from the hand-shaft to the centre of the bob is 450mm. The distance from the hand shaft down to the lowest tip of the pendulum is 525mm.
The APL 07 is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£0.00 (EUR 0.00)
Please note that we ship to Canada, USA, Australia & New Zealand.
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: PS 063 - 65cm Cable movement with 1/2-hour chime on coiled gong, run time 7 days, auto-night silencing.
Dial: Oakside Ø180mm white dial with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Kieninger 65cm x 140mm Timber Pendulum. (black lacquered shaft).
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Pulleys: Small brass cable pulley (35mm) for PS & RS movements.
Weight Shells: Two 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm
Gongs: 133mm Coil gong Kieninger PS
Mounting: Cable suspension plate included in set.
Movement dimensions: PS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 114mm x 99mm x 2.0mm. Fitted with Maintaining Power, a dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 063 movement chimes the hours and strikes on the half-hour on a coiled gong.
The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,098.14 (EUR 1,372.68)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 23 featuring the Kieninger RWS 13, 65cm Vienna movement
Pendulum nominal length 65cm. Spring & Cable Weight Drive.
Plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.
THIS MOVEMENT SET IS IDEAL FOR MEDIUM WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger RWS 13 - 65cm.
Dial: Oakside Ø180mm white dial with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Kieninger 65cm x 140mm Timber Pendulum. (black lacquered shaft).
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Pulleys: One twin weight yoke pulley.
Weight Shells: Two 50mm x 120mm with large hooks
Shell Fillings: Two lead @ 2.0kg. 48mm x 120mm
Gongs: 8-rod gong - 430mm for RWS.
Mounting: Cable suspension plate included in set.
Movement dimensions: RWS
lease note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.
The RWS 13, 65cm movement with a 20cm dial requires a minimum clock cabinet internal height of 985mm, a width of 205mm and a depth of 135mm measured from the inside face of the dial glass to the rear panel. To achieve 8-day running, the weights need to be able to drop a minimum distance of 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the hand-shaft to the centre of a 140mm pendulum bob is 532mm and it will swing about 195mm. The distance from the rear panel to the front face of the weight is approximately 120mm.
The Dial, Hands and Movement can be supplied assembled and we will attach these items to the movement mounting bracket, if it is ordered. We also provide a template so that you can easily drill the seven holes in the rear board and the movement & chimes can be easily installed in your clock using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,089.61 (EUR 1,362.01)
Please note that we ship to Canada, USA, Australia & New Zealand.
THIS MOVEMENT SET IS IDEAL FOR MEDIUM HEIGHT WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger PS 058 - 72cm
Dial: Oakside Ø180mm white dial with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Kieninger 72cm x 140mm Timber Pendulum.
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Pulleys: Two brass pulleys.
Weight Shells: Two 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm
Gongs: 133mm Coil gong Kieninger PS
Mounting: Cable suspension plate included in set.
Movement dimensions: PS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 114mm x 99mm x 2.0mm. Maintaining power, Dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 058 movement chimes the hours and strikes on the half-hour on a coiled gong.
The PS 72cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 100mm.
The Dial, Hands and Movement are supplied assembled and we will attach these items to the mounting bracket. We supply a drilling template so that you can easily drill the seven holes in the rear board - the movement set & chimes can then be easily mounted using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£898.42 (EUR 1,123.03)
Please note that we ship to Canada, USA, Australia & New Zealand.
THIS MOVEMENT SET IS IDEAL FOR MEDIUM HEIGHT WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger PS 057- 80cm
Dial: Oakside Ø180mm white dial with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Kieninger 80cm x 140mm Timber Pendulum.
Pendulum parts: Pendulum leader 164mm. (For 80cm to 116cm movements)
Pulleys: Two brass pulleys.
Weight Shells: Two 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm
Gongs: 133mm Coil gong Kieninger PS
Mounting: Cable suspension plate included in set.
Movement dimensions: PS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 114mm x 99mm x 2.0mm. Maintaining power, Dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 058 movement chimes the hours and strikes on the half-hour on a coiled gong.
The PS 80cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet.
The Dial, Hands and Movement are supplied assembled and we will attach these items to the mounting bracket. We supply a drilling template so that you can easily drill the seven holes in the rear board - the movement set & chimes can then be easily mounted using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£998.00 (EUR 1,247.50)
Please note that we ship to Canada, USA, Australia & New Zealand.
