Kieninger Clock Movement Sets for Clock Makers who insist on the Best!
Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.
On the Sets 'Options & Prices' page you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions. Oakside will remove the moon arches from all 250mm & 280mm moon dials to provide 250 & 280mm square versions.
On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!
Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Kieninger movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!
CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.
If this is your first Grandfather clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration, especially the clock by Pieter van Vliet of Canada - visit his web site and you will find a complete set of plans and fully illustrated guide to building a clock in the style of our Hampshire & Winchester with photos of each stage of construction.
BECAUSE EACH SET HAS TO BE ASSEMBLED FROM INDIVIDUAL COMPONENTS, ORDERS ARE TAKING UP TO THREE WEEKS TO PROCESS
All of the Movement, Dial and Pendulum Sets listed on this web page can be installed in a clock cabinet built to the selected plan, however you must compare the dimensions stated on the Kieninger movement instalation drawing we provide and decide if you need to make changes to any of the plans cabinet dimensions prior to constructing the cabinet.
Clockmakers Set 22 featuring the Kieninger PS 063, 65cm Vienna movement with Maintaining Power
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: PS 063 - 65cm Cable movement with 1/2-hour chime on coiled gong, run time 7 days, auto-night silencing.
Dial: Oakside Ø180mm white dial with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Kieninger 65cm x 140mm Timber Pendulum. (black lacquered shaft).
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Pulleys: Small brass cable pulley (35mm) for PS & RS movements.
Weight Shells: Two 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm
Gongs: 133mm Coil gong Kieninger PS
Mounting: Cable suspension plate included in set.
Movement dimensions: PS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 114mm x 99mm x 2.0mm. Fitted with Maintaining Power, a dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 063 movement chimes the hours and strikes on the half-hour on a coiled gong.
The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,098.14 (EUR 1,372.68)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 23 featuring the Kieninger RWS 13, 65cm Vienna movement
Pendulum nominal length 65cm. Spring & Cable Weight Drive.
Plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.
THIS MOVEMENT SET IS IDEAL FOR MEDIUM WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger RWS 13 - 65cm.
Dial: Oakside Ø180mm white dial with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Kieninger 65cm x 140mm Timber Pendulum. (black lacquered shaft).
Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
Pulleys: One twin weight yoke pulley.
Weight Shells: Two 50mm x 120mm with large hooks
Shell Fillings: Two lead @ 2.0kg. 48mm x 120mm
Gongs: 8-rod gong - 430mm for RWS.
Mounting: Cable suspension plate included in set.
Movement dimensions: RWS
lease note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.
The RWS 13, 65cm movement with a 20cm dial requires a minimum clock cabinet internal height of 985mm, a width of 205mm and a depth of 135mm measured from the inside face of the dial glass to the rear panel. To achieve 8-day running, the weights need to be able to drop a minimum distance of 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the hand-shaft to the centre of a 140mm pendulum bob is 532mm and it will swing about 195mm. The distance from the rear panel to the front face of the weight is approximately 120mm.
The Dial, Hands and Movement can be supplied assembled and we will attach these items to the movement mounting bracket, if it is ordered. We also provide a template so that you can easily drill the seven holes in the rear board and the movement & chimes can be easily installed in your clock using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,089.61 (EUR 1,362.01)
Please note that we ship to Canada, USA, Australia & New Zealand.
