Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.
On the Sets 'Options & Prices' page you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions. Oakside will remove the moon arches from all 250mm & 280mm moon dials to provide 250 & 280mm square versions.
On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!
Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Hermle movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!
CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.
If this is your first clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration.
Plans consist of two sheets measuring 36 inches x 28 inches and with most parts drawn full size.
There is also a booklet "Assembly Instructions" that assist in the construction of this regulator.
Please select a 180mm diameter dial as this will fit neatly in the Regulator doors arch.
Frank recommends that you study the Kieninger movement drawing and identify if any dimensional alterations will be required to accommodate the selected Kieninger movement set.
We also provide a full size drawing that can be used to accurately position and drill the fixing holes for the movement mounting bracket and the gongs.
All of the Movement, Dial and Pendulum Sets listed on this web page can be installed in a clock cabinet built to the selected plan, however you must compare the dimensions stated on the Hermle movement installation drawing we provide and decide if you need to make changes to any of the plans cabinet dimensions prior to constructing the cabinet.
Clockmakers Set 01 featuring the Hermle UW-58021 movement
Hermle hour striking 8-day movement (Set in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Hermle UW-58021, 8-day movement
Dial: White dial with Roman numerals and moon phase indication.
Pendulum: Brass rod with a brass bob and time adjusting nut.
Pendulum parts: Pendulum leader included.
Pulleys: 2 brass pulleys included.
Weight Shells: Two brass weight shells. 40mm x 120mm
Shell Fillings: 2 x 1.5 kg (in the weight shells)
Gongs: Coiled gong fixed to the movement.
Winding Keys: Included
Mounting: Three studs on the movement to fix to the back panel of your clock case.
Plans: Hermle movement installation drawing is included with all Sets.
The movement strikes the hours on a coiled gong.
The white dial has Roman numerals, and a moving moon dial.
There is a lever under the movement to silence the striking.
The movement, dial and gong are delivered as one complete assembly.
There are three studs on the rear of the movement which are used to fix the assembly to the rear panel of your clock case.
We provide a full size drawing which can be aligned on the rear panel of your clock case, so that the three fixing holes can be accurately drilled to accept the movement assembly
This movement set is suitable for medium size wall clocks.
We suggest the case minimum internal sizes of 30" tall, 8" wide and 5" depth.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these may need to be modified in cabinet sizes to accept this set.
Price including UK & Ireland delivery £636.00 (EUR 795.00)
Please note that we ship to Canada, USA, Australia & New Zealand.
